How to Enhance the Service Life of Deep Drawing Hydraulic PressUpdate：2024-08-14 Hits：126
To ensure that deep drawing hydraulic press can operate stably for a long time and enhance its service life, the following are several key methods and strategies.1. Standard operation
The operator strictly follows the operation manual and does not violate the rules. It is forbidden to adjust the mold without stopping the machine.
2. Daily cleaning
Clean the dust and oil on the surface of the machine regularly to keep the machine clean. Wipe the machine body after work every day.
3. Regular inspection
Check whether the connection of each component is loose and whether the moving parts are flexible. Check the lubrication of the slider rail once a week.
4. Maintenance
Replace wearing parts such as seals and filter elements on time. Replace the hydraulic oil filter element every six months.
5. Reasonable load
Avoid long-term overload operation and adjust the appropriate pressure and stroke according to the requirements of the workpiece. Do not use the hydraulic press to process workpieces that exceed its rated pressure.
6. Good heat dissipation
Ensure that the machine's heat dissipation system works normally to prevent the oil temperature from being too high. Clean the debris on the heat sink regularly.
7. Regular calibration
Calibrate the pressure sensor, travel switch, etc. to ensure accuracy. Ask a professional to calibrate the pressure sensor once a year.
8. Rust prevention
When the machine is idle, take anti-rust measures and apply anti-rust oil. When the machine is stopped for a long time, apply anti-rust oil to the exposed metal parts.
9. Safety protection
Install necessary protective devices to prevent personnel from operating incorrectly or external factors from damaging the machine. Set up guardrails in the operating area.
10. System inspection
Perform a comprehensive inspection of the hydraulic system regularly to detect potential problems in time. Perform a pressure test and leak check on the entire hydraulic system every quarter.
As an indispensable equipment in industrial production, the deep drawing hydraulic press needs regular maintenance. The maintenance methods and precautions introduced in this article can ensure the normal operation of the equipment, extend its service life, and improve work efficiency. At the same time, in actual use, the solutions to common problems need to be adjusted according to the specific situation to achieve the best results.
