How to Maintain the Working Accuracy of Hydraulic Press MachineUpdate：2024-02-26 Hits：144
Hydraulic oil is the heart of the transmission of the whole hydraulic press machine, so the cleanliness of the hydraulic oil is something that everyone must pay attention to.First of all, the operator should regularly check the parts of the hydraulic press machine, 1-2 times a month. The inspection scope includes whether various movable parts such as worm gears, worms, bearings, pressure wheels, upper and lower guide rails rotate flexibly and whether they are worn, and if defects are found, they should be repaired in time for use. In addition, it is necessary to regularly clean the hydraulic valve and oil tank, check or replace the sealing ring and filter element. Filter the oil regularly or replace the oil (the oil medium is 46# anti-wear hydraulic oil).
Secondly, the workbench should be cleaned at the end of each use, and if it is not used for a long time, the mold should be removed after one use or when it is stopped. After the mold is removed, it should be placed in a covered iron box, and all of it should be immersed in oil, keep it clean, and avoid rust and bruises. The place of use should be cleaned frequently.
Finally, electrical components should be maintained and inspected regularly to keep them in good working condition. Cooling fans should be regularly cleaned of dust with compressed air. Electrical components should pay attention to the working environment conditions (temperature, humidity), in a good environment, will prolong the service life of the components. The maintenance of electrical components should be carried out by professional and technical personnel, especially the inverter should be carried out more carefully, and under normal circumstances, it should be sent to the hydraulic press manufacturer for maintenance.
On the one hand, the use of hydraulic press machine is to focus on the protection of the system, on the other hand, it is the electrical aspect, because the system determines the performance of the hydraulic press machine, if there is a problem with the electrical machine, it takes a long time to overhaul, because the electrical wiring is complex, and it needs to be checked one by one. During use, we must pay attention to protection.
