Hydraulic Press Machine for BMC Quartz Stone SinkUpdate：2023-03-21 Hits：257
At present, there are two types of sinks in the market: BMC quartz stone sinks and stainless steel sinks. Do you want to know which kind of quartz stone sinks are made of, and equipment are used to produce them?Quartz stone sinks and stainless steel sinks are produced by hydraulic press machines and matching molds. One is a BMC composite material molding hydraulic press, and the other is a stainless steel deep drawing hydraulic press.
BMC Quartz Stone Sink
According to the practicality and convenience of operation, hydraulic press machines with three-beam and four-column structures are mostly used. The pressure of the main cylinder, the stroke of the cylinder, and the pressing speed can be adjusted arbitrarily within a certain range. The workbench of the hydraulic press for pressing the quartz stone sink is generally about 1500×1200mm, and the stroke and opening height of the cylinder need to be designed according to the height of the mold. Generally, we recommend making it slightly larger, so that it is very convenient to put and take out materials. Because the material of the quartz stone sink is made of quartz sand, stone powder curing agent and other materials, the mold needs to be heated and fixed during the pressing process. All the entire pressing process takes a few minutes.
Quartz stone sink molding process:
In the production process of the quartz stone sink, firstly, the raw materials are configured before pressing the sink, and the mixed raw materials are put into the kneader for thorough mixing, and poured out after the kneading is completed. Then weigh the raw materials. Each model of product has a standard weight. Put the weighed materials into the mold evenly. After placing the raw materials, the BMC quartz stone sink hydraulic press pressurizes to the set pressure. Then stop the pressurization, and keep the pressure for five to ten minutes according to the product specifications, the machine will automatically open the mold, return to the upper limit and stop the action, then the ejector cylinder will eject the product, and the product will be taken out manually. After the product is taken out, the rough edge of the product is manually cleaned and completed.
